- Topics Mentioned
- Operating System(s):
- Widows Vista
In a perfect world creating a backup image would be useless. Even in the real world, full of viruses, hard drive failures, file corruption, and accidental deletions — you may never need to fall back on your backup. Nevertheless, when disaster strikes, if you don’t have a backup, all is lost. Unfortunately, I know this from experience. The beauty of my job as a programmer is that you never do the same thing twice, and it’s just not the same the second time around (if that makes any sense). I cannot tell you how frustrating it can be to lose a month’s worth of work, or even a week’s worth!
So, even though the process of creating a backup is not very convenient and you have to obtain the appropriate media to do a backup — the time and effort you devote to this is simply invaluable. If you use your computer for completing any kind of work, I recommend you perform a backup at least once a week.
To help you prepare for the worst, I will first cover the process of selecting the media to use for storing your backup image. After that, I’ll go over the steps for performing a full system backup on both Windows Vista and Windows XP.
Choosing the Right Backup Media
Before beginning the process of backing up your computer, you’ll need media to back up to. The purpose of backing up is in case of system failure, therefore the media you use should be removable. Backing up to non-removable storage is counterintuitive considering the fact that you want the backup to be able to be stored at a location separate from your computer.
In the old days of computing, it was common to backup to a tape drive. This was not very practical for anything other than backup files that need only be read from beginning to end, making it a cheap solution. Nowadays, it’s more common to use CDs, DVDs or an external hard drive. Today massive amounts of storage are much less expensive than they used to be, so this is the more practical way to go.
The Windows Vista Backup and Restore Center has a built-in functionality for saving the backup to CDs or DVDs. In Windows XP, the process of backing up to CDs or DVDs is a bit more complicated and involves an extra step. Using the Windows XP Backup Utility you first need to save the backup image to the local drive, then burn it to the CDs or DVDs. If the backup image is larger than a single CD or DVD can store, then the backup image needs to be split into multiple files to span across multiple disks. A full system backup in Windows XP will also require a floppy disk to use to boot from, if you ever need to restore the backup.
Performing a Full System Backup in Windows Vista
- Launch the Windows Vista Backup and Restore Center by clicking the Start Menu | All Programs | Maintenance | Backup and Restore Center
- The Backup and Restore Center provides the ability to back up or restore files or the computer. Click the Backup computer button to perform a full system backup. If the User Account Control prompt appears click the Continue button.
- When Prompted where to save the backup you can select either a hard drive or to one or more DVDs. Select the media that you will be using for the backup and click the Next button.
- If the selected destination does not contain enough space to store the image you will be prompted to select the drives you wish to back up. System drives will automatically be checked and cannot be unchecked and the backup destination drive will be disabled. Click the Next button when you are finished selecting the drives to backup.
- Next you will be prompted to confirm your backup settings. Click the Start backup button to begin creating the backup image.
- After the backup image has been created a message stating that the backup completed successfully will be displayed. Click the Close button to complete the process.
Performing a Full System Backup in Windows XP
- Launch the Windows XP Backup Utility by clicking the Start Menu | Programs | Accessories | System Tools | Backup.
If you have a removable storage device such as a tape drive for your backup, you may be prompted to start the Removable Storage Service. You can start the service through the Start Menu | Control Panel | Administrative Tools | Services then right click the Removable Storage service and click Start. - The first dialogue of the Backup Utility provides the ability to switch to advanced mode or continue in wizard mode. Click the Next button to start the wizard.
- Next you will be prompted if you want to perform a backup or restore. Select backup files and settings then click the Next button.
- From the next wizard prompt you are given a choice of what to back up. Choose the option to backup all information on this computer then click the Next button.
- When prompted for the Backup Type, Destination and Name click the Browse button and navigate to the media you wish to store the backup to and click the Save button. Back in the prompt enter the name for the backup file then click the Next button.
- The last wizard prompt will display the settings of the backup. Click the Finish button to begin the backup.
- When the backup image has been created you will be prompted to insert a floppy disk to use as the system recovery disk. Insert the disk and click the Continue button to proceed.
- After the system recovery disk has been created you will be given the options to view the backup report or close the Backup Utility. Click the Close button to finish.
You also have the option to backup only select documents and files, such as your e-mail address book, your photo or music collection, or your crucial correspondence. In this case instead of choosing the option to backup all information on your computer, you can select the files you want to include in the backup. Before you choose this option however, make sure that you organize your files and figure out what needs to be backed up. For some people, backing up all the information is just easier.
So make this a part of your weekly routine, and the backup process will be easy to remember and easy to perform! Pick one day out of the week and set aside 20 minutes to backup all your hard work and efforts.
Which video covers back up in depth? Interested in the command line approach detailed for the system administrator with command line options a kin to:
“You also have the option to backup only select documents and files”.
thanks
rudy
Many machines, especially lap tops don’t have floppy disk drives any more so what is the procedure to boot on that case.
Use WinPE to boot.
Use either a CD/DVD
or a USB key/stick that is bootable.
The laptop will need to support booting from USB, otherwise use the CD/DVD.
what I forgot to mention is that there are USB floppy drives out there also.
Use WinPE to boot (what is this boot means please explain )
shujah
What if you don’t have the backup program listed in the System Tools?
If the backup program is not listed in System tools, I am guessing that you are using Windows XP Home. If that is the case, you must install the backup program manually from the XP Home CD by executing ‘\VALUEADD\MSFT\NTBACKUP\Ntbackup.msi’. It should be available after performing the installation.
Followed your instructions to BackUp using XP home edition – no problems til I pressed the finish button – message appears telling me that Boot Disk could not be created and program aborted. Tried several times, same message each time. How come the program never tried to do the backUp first ?? Can I get around this in any way
I have a CD and DVD drive as well as Floppy drive
A full system backup in Windows XP should always create a bootable floppy to restore with in case of system failure. It is not clear if you are actually supplying a blank floppy disk when requested. If you are not, supplying one would be the easiest way around the problem. If you do not want to create a bootable floppy for your backup, you could replace step 4 with the instructions below.
Select the Let me choose what to back up option and click Next. For the Items to Back Up, expand My Computer and check the local hard drives and System State boxes and click next. The rest of the backup process should be the same except you will not be prompted for a floppy.
How do i create a recovery disk if i dont have a floppy drive.
I have Vista Home Premium and it has the file backup tool, but no system backup tool. It says “Back up files” but not “entire computer.”
This computer didn’t come with a recovery disk when new. It is a laptop and I’m wondering if I have any recourse if my hard drive fails?
Thanks for any suggestions,
I have the same problem as Tim. I have Home Premium and no system disk. If I get hold of one (legally of course) will I be able to do as Jason suggests in comment #7?
Or is there something else I need to do?
Thanks for any suggestions.
Thanks, Jason, for your explanation of writing the backup image to the hard drive first. I had a blank DVD in my DVD player, and it was driving me nuts why the Backup Utility couldn’t see it.
great post there mate.
well i have never tried that myself though.
what u can also do to sort things out is -get nero or any CD/DVD burning software for that matter.
what is essential is to organise ur data.
simply keep burning DVDs of the data u intend to back up.
if anyone interested, do leave a comment ,we’ll try and discuss how to go about it.
100% success rate.
one more thing– can windows be re-installed as many times as we want from a single windows disk?
i want to learned more about information technology if you want to help us thanks bye
i did a full system backup of my vista O/S but i cannot restore the backup. i tried using attach vhd from disk management utility but the option is not found. can u please give me a hand on how to go about the restoration. Thank u. Vincent